P3410
Cylinder 2 Deactivation/Intake Valve Control Performance
P3410 covers a cylinder 2 deactivation system that is electrically intact but does not do what is commanded, such as valves that keep opening or fail to return. No manufacturer documents this code publicly. GM checks this behavior on the L84 under its own code P3499, by watching manifold pressure while cylinder 2 should be off; Ford uses the matching cylinder 1 code P3402. GM bulletin 21-NA-036 for 3.6 L V6 engines shows how such faults appear in practice: oil leaking past the control valve or rockers that do not latch cause misfires on cylinder 2 (P0302). Circuit faults belong to P3409, P3411 and P3412. Expect roughness and lost economy.
Possible causes
- Oil bleeding past the control valve seal, pressure lost high
- Rocker or lifter of cylinder 2 not latching medium
- Low or degraded oil medium
- Broken solenoid tip left in the bore keeps a new valve from seating low
Symptoms
- Misfire on cylinder 2, often after a reduced-cylinder phase
- Check engine lamp on
- Vibration at light load
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P3410
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.