P340C
Deactivation/Exhaust Valve Control Circuit Bank 1
P340C concerns a separate electrical circuit that disables the exhaust valves of bank 1 as a group. A fault in its wiring, connector or actuator coil sets the code. No manufacturer documents it publicly, and none of the known production systems needs it: GM's DFM engines feed the intake and exhaust lifters of each cylinder from one shared solenoid, and a GM patent application describes one hydraulic valve per pair of cylinders that drops the exhaust valves before the intake valves purely by cam timing. Under CARB rules every output of this type needs an electrical integrity test. The intake-side circuit is P340A, bank 2 exhaust P340D, the bank 1 exhaust function P341C. Drivers mainly see the lamp; deactivation is suspended.
Possible causes
- Open or shorted wire in the bank 1 exhaust actuator circuit medium
- Exhaust deactivation actuator coil open or shorted medium
- Connector or wiring damaged by heat near the exhaust side low
- Engine control module output stage fault low
Symptoms
- Check engine lamp on
- Reduced-cylinder mode not available
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P340C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.