P3408
Cylinder 1 Exhaust Valve Control Circuit High
If an engine has its own actuator for the exhaust valves of cylinder 1, P3408 marks a control circuit that reads high, usually a short to battery voltage. No manufacturer documents this code publicly. For comparison, GM checks the intake-side P3404 with the driver switched on and flags under 0.5 ohm to supply. A GM patent application switches intake and exhaust valves together through one shared hydraulic valve, exhaust side first, and describes no separate exhaust channel either. With one solenoid per cylinder, as on GM's DFM, the code is not needed. Siblings: P3405 open, P3406 function, P3407 short to ground; P3404 is the intake-side equivalent.
Possible causes
- Control wire shorted to a supply voltage medium
- Shorted coil in the exhaust valve actuator medium
- Output stage fault in the engine control module low
Symptoms
- Check engine lamp on
- Cylinder deactivation disabled
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3408
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.