P3407
Cylinder 1 Exhaust Valve Control Circuit Low
P3407 stands for a short to ground in the control circuit of a dedicated exhaust valve actuator on cylinder 1. No manufacturer documents this code publicly, so there are no published thresholds. As an analogy, GM's intake-side code P3403 counts an impedance under 0.5 ohm to ground, seen with the driver off, as a fault. CARB requires such output circuits to be checked for shorts. Engines with one shared solenoid per cylinder, like GM's AFM and DFM V8s, report this fault under the intake-side codes instead. An open exhaust circuit would be P3405, a short to power P3408. The car usually keeps running normally on all cylinders, with a warning lamp.
Possible causes
- Actuator control wire shorted to ground medium
- Internal short in the exhaust valve actuator medium
- Engine control module output stage fault low
Symptoms
- Check engine lamp on
- No change to reduced-cylinder mode
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3407
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.