P3405
Cylinder 1 Exhaust Valve Control Circuit/Open
J2012 reserves P3405 for an open control circuit of a separate exhaust valve actuator on cylinder 1. No manufacturer documents this code publicly. The common systems do not need it: in GM's Dynamic Fuel Management one solenoid per cylinder feeds oil to both intake and exhaust lifters, and Ford's VDE only lists intake codes for cylinder 1. A GM patent application uses one shared hydraulic valve and only sets the order, with the exhaust valves switched off and back on before the intake valves; a Ford patent watches the exhaust valve via exhaust pressure. A separate exhaust actuator would fall under CARB's output component rule, which asks for continuity checks. If used, an open coil or wire would set P3405, while P3401 covers the intake side and P3406-P3408 the other exhaust faults.
Possible causes
- Broken wire or loose terminal to the exhaust valve actuator medium
- Open coil in the cylinder 1 exhaust valve actuator medium
- Output driver fault in the engine control module low
Symptoms
- Check engine lamp on
- Cylinder deactivation or valve switching disabled
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P3405
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.