P3400
Cylinder Deactivation System Bank 1
P3400 is the bank-level verdict: the engine computer has concluded that cylinder deactivation on bank 1 as a whole does not behave as commanded, without blaming a single circuit. Makers fill it differently. On the 2019 LT4 Corvette, GM compares a manifold pressure model with all cylinders firing against the same model while cylinders are off; 100 failed samples out of 200 give a Type B code. Mazda's 2.5 l four-cylinders store it when a deactivation oil control valve is clogged, for example by plastic from the filter wrapper (SA-061/20). In Honda's VCM V6 it stems from a rocker arm oil pressure switch, and the Hemi Ram 1500 got a PCM update for it. Bank 2 is P3497. The lamp comes on; misfires or rough running may follow.
Possible causes
- Deactivation oil control valve or its screen clogged by debris high
- Low oil level, wrong grade or overdue oil change high
- Switchable rocker arm or lifter broken, dislodged or not latching medium
- Oil pressure too high on cold start, e.g. weak relief valve spring low
- Engine control software needing an update low
Symptoms
- Check engine lamp on
- Rough idle or misfire codes on the deactivating cylinders
- Ticking or clattering from the valve train
- Reduced-cylinder mode no longer used, higher fuel use
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P3400
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.