P2EC0
Turbocharger Compressor Outlet Temperature Sensor Circuit Low
P2EC0 reports that the compressor outlet temperature signal has fallen under the lowest valid voltage. Air temperature sensors on the intake side are usually NTC thermistors, as Bosch states for its combined boost pressure and temperature sensor; their resistance shrinks as they warm, so a signal pulled towards ground is read as extreme heat. A signal wire touching ground or a sensor shorted internally is the usual cause. With a PTC element the meaning would be reversed. No manufacturer documents P2EC0, so thresholds and timing are unknown. Section (e)(15.2.1) of California's 13 CCR 1968.2 has the low fault stored apart from the high one (P2EC1). In GM's patent US11060525 a faulty sensor switches the closed-loop boost reduction off.
Possible causes
- Signal wire shorted to ground, e.g. chafed on the charge pipe high
- Sensor shorted internally medium
- Oil or moisture bridging the connector pins low
Symptoms
- Check engine lamp on
- Live data shows an implausibly hot charge air temperature
- Possible loss of power if a substitute value limits boost
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2EC0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.