OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2EBE

Crankcase Temperature Sensor Circuit Low

P2EBE reports a crankcase temperature signal below the lowest voltage the circuit can produce when intact. In practice a short is behind it: either the signal lead has rubbed through to ground on the engine block, or the insulation inside the sensor has given way, for instance after oil has crept into the housing. If the sensor is an NTC thermistor, a low voltage stands for great heat, so the module would believe the crankcase is overheating; a PTC element would appear frozen. No manufacturer publishes this code. The reading matters because systems such as Ford's crankcase heating in US9228557 use it to judge whether warm air arrives. CARB's 13 CCR 1968.2 keeps the low fault apart from P2EBD (section (e)(15.2.1)). The engine itself usually runs on unchanged.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / BE

Possible causes

  • Signal wire chafed through to ground on the engine high
  • Sensor shorted internally after oil ingress medium
  • Faulty input stage in the engine control module low

Symptoms

  • Check engine lamp on
  • Live data shows an implausible crankcase temperature
  • Crankcase heating or ventilation checks suspended

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2EBE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication