P2EBB
Crankcase Temperature Sensor Circuit
P2EBB is the general circuit fault of a sensor that reports the temperature inside the crankcase, i.e. of the blow-by gas or the space above the oil. Patents show what engines do with it: Ford (US9228557) feeds exhaust-heated air into the crankcase, checks the arrival with such a sensor and stores a code, possibly with MIL, if the reading stays below the expected value; GM (US5897597) diagnoses the ventilation by the temperature rise of the gas between fresh-air inlet and PCV valve. CARB 13 CCR 1968.2 (e)(9) requires the crankcase ventilation to be monitored, so a dead sensor can block that check. No manufacturer documents P2EBB publicly. The code fits signal loss or intermittent contact; out-of-range faults are P2EBE and P2EBD.
Possible causes
- Connector loose or contaminated with engine oil high
- Harness wire breaking intermittently on the engine block medium
- Sensor element failed internally medium
Symptoms
- Check engine lamp on
- Crankcase temperature missing or jumping in live data
- No noticeable change in how the engine runs
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2EBB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.