OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2EB9

Reductant Injection Valve Circuit Range/Performance Bank 2 Unit 2

P2EB9 is the bank 2 twin of P2EAE: the circuit of the second DEF injector on the second exhaust bank works electrically, but its signal does not match a valve that opens and closes as it should. Bank 2 implies a separate exhaust line for the second cylinder bank, and unit 2 a further dosing point on that line. No manufacturer documents P2EB9 publicly. GM's 3.0 L Duramax LZ0 shows how such a test runs for bank 1 unit 2: it takes the second derivative of the injector current and fails when too few injections show the armature moving. Delphi's patent US11280245 describes the same kink detection. Open circuit, low and high on this injector are P2056 to P2058. Usual causes are crystal deposits, a sticking armature and corroded contacts; NOx emissions can then exceed the limits.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / B9

Possible causes

  • Armature sticking from urea crystals high
  • Corroded contacts distorting the current trace medium
  • Injector coil with changed characteristics low

Symptoms

  • Check engine lamp on
  • DEF system warning
  • Higher NOx emissions

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2EB9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication