P2EB7
Replace 12V Battery
P2EB7 is a request rather than a classic fault: the vehicle considers its 12 V battery due for replacement. Energy management judges battery condition through a sensor or a battery with its own electronics on the LIN bus; HELLA's intelligent battery sensor, for example, measures voltage, current and temperature and works out state of charge, health and function. Bentley stores P2EB700 in the engine electronics of the 2025 Continental GT, GTC and Flying Spur. Its bulletin 2079155/2 states that the code lights no MIL and can stem from a brief communication fault between LIN bus and battery module; the remedy is to disconnect battery and LIN plug for 15 minutes, not a new battery. On other vehicles the code may truly point to an aged battery, so a proper battery test comes first.
Possible causes
- 12 V battery worn, low remaining capacity high
- Brief LIN communication fault with the battery module (Bentley 2025) medium
- New battery fitted but not registered or of the wrong type medium
- Faulty battery sensor low
Symptoms
- Code stored without warning lamp
- Possibly weak starting or reduced start-stop operation
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2EB7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.