OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2EB5

Hybrid/EV Battery Inductive Charger Input Voltage Low

P2EB5 reports that the input of the inductive charger receives too little voltage during power transfer. That input is the AC the vehicle coil collects from the ground pad across the air gap, so the level depends on alignment, gap and the power sent by the ground side. For its reference coil SAE J2954 allows vertical gaps of up to about 250 mm and a sideways offset of up to 100 mm. In the patent US10826565 of Momentum Dynamics, now InductEV, the vehicle side keeps reporting its voltage and current to the ground unit, which drops the charging signal when a fault is flagged. No manufacturer documents P2EB5 publicly. Low readings come from a poor parking position, an object between the pads, a weak ground unit or a faulty sense circuit. Charging slows or stops; cable charging is unaffected.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / B5

Possible causes

  • Vehicle not parked accurately over the ground pad high
  • Object or ice between ground pad and vehicle coil medium
  • Ground unit delivering too little power medium
  • Faulty input voltage measurement in the charger low

Symptoms

  • Inductive charging slow or interrupted
  • Charging fault message

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2EB5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication