OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2EAC

Active Radiator Air Flow Control Module A Performance

P2EAC is the general performance fault of module A: the module can be reached, but the flap system does not do what it is told. GM's check of the comparable smart shutter actuator on the 3.0 L diesel LZ0 shows the approach: a gap of more than 5 % between commanded and reported position starts repeated attempts to free the flaps, and only after a calibrated number of failed retries is the fault confirmed, type B with the MIL after two trips. A Chrysler patent application, US20130338870, names ice as a frequent reason and has the system try again once the temperature is above 0 °C. No manufacturer documents P2EAC publicly; Hyundai and Kia's US11225900 shows the flap hardware involved. Usual causes are frozen or blocked flaps, a broken linkage and a worn actuator.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / AC

Possible causes

  • Flaps frozen or blocked by debris high
  • Broken or detached flap linkage medium
  • Worn gearbox or motor in the actuator medium

Symptoms

  • Check engine lamp on, where the maker assigns a MIL
  • Flaps do not open or close, sometimes only in frost
  • Warmer engine under load or slower warm-up

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2EAC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication