P2EAA
Active Radiator Air Flow Control Module A Control Circuit Performance
The active radiator air flow system meters cooling air with motor-driven flaps between bumper opening and radiator; J2012 keeps its control module apart from the grille shutter modules (P05C0, U0284). Hyundai and Kia's patent US11225900 shows such a system with two flap zones, each moved by its own actuator according to vehicle speed, outside and coolant temperature and refrigerant pressure. P2EAA means the control circuit of module A responds but does not behave as expected, for instance a drive signal outside its plausible range. No manufacturer documents P2EAA publicly. GM's smart shutter actuators show the comparable setup: they talk to the engine module over LIN, which only judges them with a supply between 11 and 32 V. A fault mostly costs fuel and warm-up speed.
Possible causes
- Corroded or loose connector in the exposed front-end area high
- Supply or ground of the module outside its range medium
- Internal fault in control module A medium
Symptoms
- Check engine lamp on, where the maker assigns a MIL
- Flaps stay in one position
- Slower warm-up or slightly higher fuel consumption
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2EAA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.