P2EA9
DC/AC Converter A Over Temperature
P2EA9 reports that converter A has become too hot. The converter watches the power devices that switch and invert the current – MOSFETs, diodes and transistors – and in Toyota Industries' patent US10050558 it stops once their temperature passes a set limit, then waits for a manual reset, the same handling as an input overvoltage. Heat builds up with long use near full load, a blocked air path behind trim or under a seat, high cabin temperatures or a cooling fan that no longer runs. Ford's high-voltage Pro Power layout (US11043801) also lowers the power ceiling while driving compared with standing. No manufacturer documents P2EA9 publicly. The sockets stay dead until the unit has cooled; if it repeats without heavy load, the sensor or converter itself is suspect.
Possible causes
- Long operation near the rated power high
- Cooling air path blocked or cooling fan failed medium
- High temperature at the mounting location medium
- Faulty temperature sensing or power stage in the converter low
Symptoms
- AC sockets switch off under load
- Output only returns after cooling and a restart
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2EA9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.