OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2EA7

DC/AC Converter A Input Voltage Too Low

A DC/AC converter turns direct current into household AC for sockets in the vehicle. P2EA7 means the DC voltage reaching converter A is below the range in which it is allowed to run. Which supply that is depends on the design: Toyota Industries' patent US10050558 describes a 12 V-fed unit that only works between about 11 and 16 V, pauses its output when a weak or aged battery pulls the input down and restarts on its own once the voltage is back. Ford's patent US11043801 instead feeds the Pro Power sockets of a hybrid from the high-voltage bus. No manufacturer documents P2EA7 publicly. The driver notices dead sockets; the cause usually lies in the supply rather than in the converter.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / A7

Possible causes

  • Weak, discharged or aged 12 V battery high
  • Voltage drop at the supply fuse, cable or ground point of the converter medium
  • Hybrid high-voltage supply restricted, for example at very low state of charge low
  • Faulty input voltage measurement inside the converter low

Symptoms

  • AC sockets in the vehicle deliver no power or cut out
  • Message about the power outlet or inverter in the cluster
  • Problem appears mainly with engine off or at low battery charge

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2EA7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication