P2EA6
Turbocharger Compressor Outlet Temperature Sensor Circuit
P2EA6 is the general circuit fault of the temperature sensor in the charge pipe between the turbo compressor and the charge air cooler. Squeezing the air heats it a lot; Cummins notes in patent US6401457 that excessive outlet temperature can melt the compressor housing or harm the wheel, and still estimated the value in 2001 because no series sensor lasted there. GM's later patent US11060525 fits a sensor in exactly this duct and trims the boost target in closed loop once a limit is reached; with a sensor fault that function is disabled. No manufacturer documents P2EA6 publicly. It covers missing or intermittent signals that are neither clearly low (P2EC0) nor high (P2EC1); implausible values belong to P2EC2.
Possible causes
- Loose or corroded connector on the charge pipe sensor high
- Wire breaking intermittently near the hot turbocharger medium
- Sensor element failing internally medium
- Faulty input in the engine control module low
Symptoms
- Check engine lamp on
- Compressor outlet temperature missing or jumping in live data
- Boost limitation at high load possibly less refined
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2EA6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.