OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2EA1

Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 6

P2EA1 is the general electrical fault of a sixth exhaust temperature probe on bank 1, counting from the engine towards the tailpipe. No manufacturer documents this code publicly: the diesel tables that are published stop at probe 5, which GM's 2025 table 25OBDG04A places behind the particulate filter. GM's logic for that probe hints at the use of a general circuit code: a broken lead appears as more than 100 MΩ and is booked as High, while digital thermocouple modules also watch their communication. P2EA1 thus fits interruptions or contact faults the module cannot assign to one limit. Stellantis warns for the 2025–2026 Ram heavy-duty diesel to go by sensor names, not numbers, when locating a probe. Low and High are P2EA3 and P2EA2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / A1

Possible causes

  • Corroded or heat-damaged plug of the sixth probe near the exhaust high
  • Probe lead or internal wire broken by exhaust vibration medium
  • Harness chafed or melted along the aftertreatment medium
  • Faulty input stage or temperature evaluation module low

Symptoms

  • Check engine lamp on
  • Particulate filter regeneration delayed or blocked
  • Live data for probe 6 missing or jumping

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2EA1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication