P2E9F
Charge Port Door B Unlock Control Circuit Low
P2E9F is the low-voltage form of the flap B release output fault: the driver stage measures its control line close to 0 V where a higher level is expected. A control wire chafed to body ground or an actuator winding that has shorted are the usual culprits, and a protective fuse or driver shutdown can follow. No manufacturer documents P2E9F publicly. GM's Volt folds this case into the combined A code P0CD1, judging a short to ground only while the release is commanded. A GM patent shows what the line feeds: a briefly energised actuator retracts a post so a spring can push the flap open, after which power is removed. Porsche's Taycan bulletin 186/24 has technicians check the lines and plugs of the flap servo motors before replacing modules. High-level faults are P2EA0, the function test P2E9E. Flap B then stays shut.
Possible causes
- Control wire of the flap B actuator shorted to ground high
- Shorted winding in the flap B actuator or motor medium
- Water in the actuator connector low
Symptoms
- Flap B does not release on any request
- Blown fuse for the flap circuit possible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E9F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.