P2E9D
Charge Port Door B Unlock Control Circuit
P2E9D concerns the output that releases or drives charge flap B, not its sensors. Depending on the design this is a latch actuator or a small motor: Audi's e-tron family uses lock actuators F496 and F497 for its high-voltage charging flaps on the two sides, and Porsche's Taycan a servo motor per charge port door. No manufacturer documents P2E9D publicly. GM's 2011 Volt shows how the A version P0CD1 is judged from the fault flag of the driver stage: a short to ground while the release is commanded (3 of 4 samples), a short to 12 V or an open circuit while it is not (64 of 80 samples, 50 ms each), Type B. Split low and high codes are P2E9F and P2EA0, the movement check P2E9E. The driver finds flap B shut and has to use the other side or the emergency release.
Possible causes
- Flap B actuator or motor winding open or shorted high
- Damaged control wire or connector to the flap B actuator medium
- Faulty output stage in the control unit low
Symptoms
- Flap B does not unlock or move at all
- Charging only possible on the other side
- Charging flap warning in the cluster
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E9D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.