P2E9C
Charge Port Door B Position Sensor Circuit Intermittent/Erratic
P2E9C covers a flap B position signal that flickers or drops out briefly instead of failing for good. Common sources are loose terminals, a harness bent at every flap movement, or a sensor sitting loose in its holder. No manufacturer documents P2E9C publicly. Two official cases show how fragile this signal path can be on two-flap cars. Porsche replaced the harnesses of flap A on the driver side and flap B on the passenger side of 2020 Taycans because an incorrect sensor signal made the car misread the end position. Audi traced wrongly shown flap states on the e-tron GT to the actuator, naming oxidation and foreign particles inside it. Lasting faults are P2E98, P2E9A and P2E9B, plausibility errors P2E99. Drivers see a flap status that changes on its own or charging warnings that come and go.
Possible causes
- Loose terminal in the position sensor connector high
- Harness to flap B strained or chafed by flap movement medium
- Oxidation or particles in the flap actuator with integrated detection medium
Symptoms
- Flap status in the display switches without reason
- Sporadic charging flap warnings or interrupted charging
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E9C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.