P2E96
Charge Port Door B Open Request Switch Circuit High
P2E96 is stored when the request signal of charge flap B climbs past the top of its permitted range. Contact with a 12 V supply raises it, and so does a broken sensor ground or switch path that lets a pulled-up input float. The control unit then usually sees a request that never arrives. No manufacturer documents P2E96 publicly. GM's Volt table for flap A sets the matching P0CCA when readings pass 94.5 percent in 6 out of 8 cases, Type B. On Porsche's Taycan each flap can be moved both from the centre console and by the touch-free sensor; bulletin 186/24 has technicians test both ways on both sides and check lines and plug connections before replacing parts. Low readings are P2E95, the invalid middle band P2E93.
Possible causes
- Sensor signal wire shorted to a 12 V supply high
- Interrupted ground or switch path at the flap B sensor medium
- Pushed-back or loose pin in the flap module connector medium
Symptoms
- Flap B never reacts to the hand or touch
- Opening from the centre console or display still works
- Warning that the charging flap is impaired
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E96
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.