OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E94

Charge Port Door B Open Request Switch Circuit Performance

With P2E94 the open request input of charge flap B is electrically sound, yet its behaviour cannot be right, for example a request that stays active for far too long. Audi describes exactly this pattern for the Q6 e-tron in bulletin 2076776/1: tension in the left or right flap module can deform the flap so that it sinks into the body and the button inside the module stays pressed; the flap can then no longer be opened from outside, while the display still opens it. No manufacturer ties this to P2E94 publicly. CARB 13 CCR 1968.2 (e)(15.2.1) asks for rationality checks on inputs where feasible and for separate codes from circuit faults, which is the role of this code next to P2E93, P2E95 and P2E96. A GM patent shows the basic chain: release button, controller, latch actuator.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 94

Possible causes

  • Deformed or recessed flap B keeping the request button pressed high
  • Sensor of flap B shifted or not seated correctly medium
  • Ice or dirt acting on the sensor area low

Symptoms

  • Flap B cannot be opened from outside
  • Opening via the display or charging menu still works
  • Flap B sits deeper than the surrounding body panel

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E94

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication