OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E93

Charge Port Door B Open Request Switch Circuit

P2E93 is the basic circuit fault of the input with which the driver asks the second charge flap to open. On cars with a flap on each side this input is usually a touch or wipe sensor on the flap itself: Porsche's Taycan and Cayenne Electric open each flap when a hand passes over a sensor area at its rear, and Porsche's WLK2 parts list calls the passenger-side flap door B. No manufacturer documents P2E93 publicly. GM shows how the A version P0CC7 works on the 2011 Volt: a reading in the forbidden band from 65.9 to 81.6 percent of reference, seen in six of eight 50 ms samples, sets a Type B code. Low and high faults belong to P2E95 and P2E96, implausible behaviour to P2E94. Typically flap B ignores the hand but still opens from the screen.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 93

Possible causes

  • Touch or wipe sensor of flap B with a wrong internal resistance high
  • Partly broken or corroded signal wire to the flap B sensor medium
  • Moisture in the connector at the flap module medium
  • Faulty input stage in the control unit reading the sensor low

Symptoms

  • Charge flap B does not react to touch or hand gesture
  • Flap B still opens via the central display or app
  • Charging flap warning in the instrument cluster

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E93

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication