P2E92
Charge Port Door B Open Request Switch Wake-Up Circuit
P2E92 concerns cars with a second electrically opened charge door. Its open-request switch or sensor must be able to rouse sleeping control units, so besides its normal signal it drives a wake-up line, and P2E92 records that the two disagree. Porsche's Taycan campaign WLK2 shows the naming, door A at the driver and door B at the passenger side, both opened by a hand gesture over a sensor; Audi's newer models put an extra AC inlet with its own flap on the opposite side, also opened at the flap. No manufacturer documents P2E92. GM's 2011 Volt tests the A version, P0CC6: wake-up active with the switch released, or pressed without wake-up, filtered in 50 ms steps, Type B over two trips. The usual result is a door B that sometimes ignores a press.
Possible causes
- Open or shorted wake-up wire between switch and control unit high
- Worn switch or sensor at door B giving mismatched signals medium
- Water ingress or corrosion at the door B connector medium
- Wake-up input of the control unit faulty low
Symptoms
- Charge door B does not open on request every time
- Door opens only from the screen or the other side works normally
- Increased standby drain if the line keeps waking modules
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E92
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.