P2E90
Battery Charger A Internal Power Supply Performance
P2E90 says the internal power supply of charger A, the rails that feed its control and gate-driver electronics, does not behave as intended. Kia uses the code: technical bulletin ELE409 (service action SA639, December 2025) covers 2025 EV6 and 2026 EV9 built between 21 February and 18 September 2025 that store P2E9092, performance or incorrect operation, and can no longer charge on Level 1 or 2; the fix is a new integrated charging control unit (ICCU). Mitsubishi watches the same rails under P0D67 on the Outlander PHEV: 3.3, 6 and 12 V supplies must stay in their windows for 1 s, otherwise charging stops. TI explains that such bias supplies draw on the 12 V or high-voltage battery. Charger B is P2E91; the 12 V feed of the module itself is P2E2C.
Possible causes
- Internal supply stage of charger A or the ICCU failed high
- Weak 12 V feed or loose low-voltage connector at the charger medium
- Charger software fault low
Symptoms
- No AC charging at home or on Level 2 stations
- DC fast charging may still work
- Charging system warning in the cluster
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2E90
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.