OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E8B

Proximity Detection Circuit B Intermittent/Erratic

P2E8B describes a plug-detection signal on circuit B that drops out or jumps for moments, so the car sees a connector appear and vanish although nobody touched it. The consequences follow from the purpose of the line: under SAE J1772 the proximity state is what lets the vehicle stop drawing current before the plug is released and block driving off while connected, so a flickering signal can end charging for no visible reason or let a drive lock come and go. In Lear's patented design the same line also wakes the charger, so glitches can rouse it needlessly. No manufacturer documents P2E8B. Mercedes describes the classic cause for circuit A on the smart with 22 kW charger: loose low-voltage plugs that act up only with warm or cold parts, alongside P0D5800/P0D5900. Hard faults are P2E89/P2E8A.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 8B

Possible causes

  • Loose low-voltage connector on the proximity line high
  • Worn proximity contact in inlet B or on the cable plug medium
  • Chafed wire with intermittent contact to ground medium
  • Moisture in the inlet after rain or washing low

Symptoms

  • Charging stops and restarts at random
  • Cable-connected message appears and disappears
  • Fault more frequent at the start or end of charging

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E8B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication