OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E89

Proximity Detection Circuit B Low

P2E89 stands for a voltage on proximity circuit B below the band the controller accepts in a state where no plug can be present. The rule for circuit A shows how this is judged: GM's Volt checks the line with the charge door closed or while driving out of Park and sets P0D58 below 4.2 V, in 2011 after 30 failures out of 50, in the 2019 tables after 240 out of 400 samples above 20 km/h, as a Type A code with MIL. Mitsubishi's 2023 Outlander PHEV sets P0D58-00 on a low input of the charger connection signal and checks the line to the PHEV-ECU for a ground short, the charging cable and even outside supply equipment. No manufacturer documents P2E89 itself. A Lear patent protects the 5 V feed of such circuits against shorts. Expect a car that believes a plug is in.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 89

Possible causes

  • Proximity line of circuit B chafed and shorted to ground high
  • Water or dirt in inlet B bridging the contact to earth medium
  • Defective charging cable left in the inlet medium
  • Input stage in the evaluating control unit damaged low

Symptoms

  • Message that a charging cable is connected although none is
  • Vehicle cannot be put into drive mode
  • Warning lamp, depending on manufacturer the MIL

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E89

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication