P2E85
Battery Charger B Input Voltage Sensor Circuit Low
P2E85 means the input voltage signal of charger B sits too low, so the car sees little or no grid voltage while it expects AC. GM uses the code on its battery-electric models, from the 2017 Bolt EV to the Lyriq, Hummer EV, Blazer, Equinox and Silverado EV and BrightDrop vans, under the wording input voltage sensor circuit low voltage. Bulletin PIT6353 and TechLink March 2025 name a typical trigger: a DC-only NACS adapter used at a household outlet or AC wallbox, which routes the shared pins to the DC contacts, so no AC reaches the charger; P0D3F, P0F71 and on the Bolt P1EE6 may set with it. A 2026 TechLink lists P0E8B-11 beside it. With the right adapter the fault is gone; otherwise check inlet, wiring and the charger. Too high is P2E86.
Possible causes
- DC-only NACS adapter used on an AC charger high
- Charging station or house circuit not delivering AC voltage medium
- Open or high-resistance AC path between inlet and charger B medium
- Sensing circuit inside charger B shorted to ground low
Symptoms
- Vehicle does not charge on a Level 1 or Level 2 AC charger
- DC fast charging works without the adapter problem
- Further charger codes such as P0D3F or P0F71 stored
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2E85
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.