OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E84

Battery Charger B Input Voltage Sensor Circuit Range/Performance

P2E84 questions the plausibility of the grid voltage that charger B reads at its input: the sensor answers within its electrical limits, yet the figure does not suit the moment, such as a voltage with no supply connected or a value that contradicts other readings. No manufacturer documents P2E84 publicly. How such a check works is shown on charger A: GM's 2011 Volt compares the AC peak voltage with two internal bulk voltages and fails when both differ by more than 34 V (Type A), while Mitsubishi's Outlander PHEV reacts to 25 V or more held for 2 s. On the Polestar 3, whose AC charger reports as charger B, input sensor faults appear as P0E8B16 and lead to replacement of the unit if DC charging still works. Hard low or high readings are P2E85/P2E86. AC charging is usually refused.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 84

Possible causes

  • Voltage sensing inside charger B drifting or faulty high
  • Corroded or loose AC contacts between charge inlet and charger B medium
  • Unstable or unusual supply from the charging station or house circuit medium
  • Charger software misjudging the reading low

Symptoms

  • AC charging does not start or stops after a short time
  • DC fast charging still works normally
  • Charging fault message in the instrument cluster or app

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2E84

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication