OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E7D

A/C Compressor Control Module Internal Temperature Sensor B Performance

P2E7D is the plausibility check for internal temperature sensor B of the electric A/C compressor controller: the reading is electrically in range yet conflicts with other temperatures. The test runs after a long rest, when all sensors should read alike. No manufacturer documents P2E7D. GM applies the method to its IGBT sensor (P0D76): the 2011 Volt tolerates 11 °C difference from ambient air and 7 °C from the CPU sensor after 21,600 s off, the 2019 tables 22 °C after 7,200 s in 8 of 10 s, Type B. Mitsubishi's Outlander PHEV compares two temperatures inside its front drive unit after a 3,600 s soak and fails at 18 °C; a Nissan patent judges an inverter switch sensor against coolant temperature. Drift, a still-warm compressor or a faulty reference can trigger it.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 7D

Possible causes

  • Sensor B drifted or poorly coupled to its measuring point high
  • Comparison value wrong, e.g. outside air or second internal sensor faulty medium
  • Compressor still warm from recent use or preconditioning when the test ran low

Symptoms

  • Usually no noticeable effect at first; fault stored after a cold start
  • Compressor may derate early or shut off on a wrong temperature
  • MIL on some vehicles after two drive cycles

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2E7D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication