OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E7C

A/C Compressor Control Module Internal Temperature Sensor B Circuit

P2E7C covers the second internal temperature sensor in the control electronics of an electric A/C compressor. Their inverter sits on the housing: a Mitsubishi Heavy Industries patent places a sensor next to the power switches, Denso measures at the switches and at the motor stator, and TI's compressor inverter reference feeds IGBT temperature back for overheat protection. The maker decides what B denotes; GM already uses separate code blocks for its CPU sensor (P0D70) and IGBT sensor (P0D75). No manufacturer documents P2E7C publicly. As the generic circuit code it only says that no usable reading arrives, with neither a low nor a high signal identified. The compressor may limit speed or shut down; since the sensor is soldered to the board, repair normally means a complete compressor.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 7C

Possible causes

  • Sensor B or its circuit on the compressor control board defective high
  • Compressor controller fails to evaluate or transmit the value medium
  • Unstable 12 V supply, ground or data link to the compressor low

Symptoms

  • A/C cools weakly or switches off
  • On plug-in hybrids and EVs, battery cooling and fast charging may be limited
  • Warning message on the climate display; MIL depends on the manufacturer

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2E7C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication