OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E7B

Drive Motor A Excitation Current Sensor Circuit

P2E7B is the general circuit fault of the measuring element for the DC field current in the rotor of drive motor A. It exists only in electrically excited synchronous motors, whose rotor field comes from a winding, as in Renault's Megane E-Tech, Nissan's Ariya and BMW's fifth-generation eDrive. The controller stores P2E7B when the signal is missing or unusable without a clear low or high reading, e.g. after a lost supply, a broken connection or a dead sensor. In TI's excitation stage a single or a pair of sensors, shunt amplifiers or isolated Hall parts, closes the field loop. No manufacturer documents P2E7B publicly. Low and high signal are P2E29 and P2E2A, implausible values P2E28. Without a trusted value the field is cut, as Audi describes for fault signals, and the motor stops pulling.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 7B

Possible causes

  • Supply or reference of the excitation current sensor lost medium
  • Open or corroded connection between sensor and motor controller medium
  • Excitation current sensor or its isolated amplifier failed medium
  • Measuring input inside the inverter or motor controller defective low

Symptoms

  • Electric drive warning lamp and MIL
  • Noticeably reduced power or no drive from motor A
  • Vehicle may refuse to enter ready mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2E7B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication