P2E78
Hybrid/EV Battery Pack Coolant Temperature Sensor D Circuit Intermittent/Erratic
P2E78 stands for a coolant temperature from sensor D that jumps around, mostly without leaving the electrical limits. A liquid loop changes temperature slowly, so fast swings point to a loose contact rather than to the coolant. No manufacturer documents P2E78 publicly. GM's 2019 hybrid table shows a matching test for inlet sensor A (P0C46): it adds up the absolute changes between ten successive readings and counts a sum above 64 °C as a fail; 4 s out of 5 s set a two-trip Type B code, and it is skipped while the hard faults P0C44/P0C45 are present. Volvo found that P0CD900 for sensor B on 2021–22 PHEVs after charging in warm weather might be a spurious entry; software release 3.2.4 resolves it (TJ 36929). CARB requires circuit continuity monitoring.
Possible causes
- Loose or fretting terminal in the sensor D connector high
- Harness rubbing through near moving or vibrating parts medium
- False detection by controller software (update) low
Symptoms
- Warning light that comes and goes
- Coolant temperature in live data jumping
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2E78
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.