P2E76
Hybrid/EV Battery Pack Coolant Temperature Sensor D Circuit Low
P2E76 reports that the voltage on battery coolant sensor D has dropped below its lower limit. Because these sensors are NTC thermistors whose resistance falls as they warm, a low voltage stands for very hot coolant, and a grounded signal wire or a sensor with an internal short produces exactly that picture. No manufacturer documents P2E76 publicly. GM's comparable sensor B code, P0CD7, sets at a reading of 87.9 °C or more, equal to an ADC count of 130 or less, for 1.75 s within a 2.5 s window; the 2016 ELR table marks it two-trip. Coolant genuinely that hot in a battery loop is rare, so suspect wiring first. CARB requires out-of-range detection for battery thermal inputs. The high-voltage counterpart is P2E77.
Possible causes
- Signal wire of sensor D shorted to ground high
- Sensor D shorted internally, for example after coolant entered it medium
- Actual overheating of the battery coolant loop low
Symptoms
- Hybrid or check engine warning
- Cooling may run at full effort or power may be cut back
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2E76
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.