P2E75
Hybrid/EV Battery Pack Coolant Temperature Sensor D Circuit Range/Performance
P2E75 means battery coolant sensor D gives a reading that is electrically fine yet does not match the other temperatures in the loop. No manufacturer documents P2E75 publicly. GM's sensor B (outlet) shows how such a check works: with the pump above 20 % the outlet value is compared with inlet and average cell temperature. The 2011 Volt fails it at more than 10 °C, 80 of 100 samples at 100 ms; the 2016 ELR allows 20 °C, 32 of 40 samples at 250 ms; both two-trip Type B. Software can be the culprit: Volvo had P0CD6 set wrongly on 2016–17 XC90 T8 (TJ 32193), Audi had P0C4300 with emissions lamp on the 2020 Q5 TFSI e, fixed by thermal module software. CARB requires rationality checks where feasible.
Possible causes
- Sensor D drifting or responding slowly high
- Plausibility logic in controller software too strict (update available) medium
- Air pocket or poor coolant flow around the sensor medium
Symptoms
- Warning light, frequently with no other symptom
- Less effective battery cooling or heating
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2E75
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.