P2E6D
Hybrid/EV Battery Pack A Cell Thickness Sensor Circuit High
P2E6D says the signal from the cell thickness sensor of pack A sits above the range the controller accepts as a real reading. The code describes the voltage, not swollen cells. No manufacturer documents P2E6D publicly, and how such a sensor is built varies: a Ford patent uses a resistive gauge on a thinned cell wall whose resistance climbs as the wall bulges, LG uses a fibre grid read by a photoresistor, and classic strain gauges are read through a Wheatstone bridge. With a pull-up input, an open wire or lost ground drives the value high; a short to a supply can do the same. Ford's BECM keeps the contactors open if a self-check finds cells no longer monitored. CARB wants separate codes for low and high out-of-range faults; low is P2E6E.
Possible causes
- Open signal or ground wire, unplugged or corroded connector inside pack A high
- Signal wire chafed against a supply or reference line medium
- Thickness or pressure sensing element itself failed open medium
Symptoms
- Hybrid or EV warning light
- Power or charging limited as a precaution
- In some designs the vehicle will not go to READY
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2E6D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.