P2E6C
Hybrid/EV Battery Pack A Cell Thickness
P2E6C means the cells of high-voltage pack A have become thicker than the battery controller tolerates: the cells are swelling. A healthy cell only breathes a little while charging; GE and University of Michigan measured about 0.1 mm, 1 % of its thickness, on the Sanyo cell of Ford's Fusion HEV pack. Lasting growth comes from aging or from gas after overcharge or overheating. No manufacturer documents P2E6C publicly. Kia shows a comparable guard: on the 2017 Niro hybrid a switch on the pack closes when cells bulge after overcharge, and the BMS then opens the main relays (P1BA7). A Ford patent likewise lets the BECM reduce current or open contactors when cell pressure is too high. Expect power limits or no READY; P2E6D to P2E6F are faults of the sensor itself.
Possible causes
- Aged cells in pack A that have grown permanently thicker high
- Gas build-up in cells after overcharging or overheating medium
- Module clamping or end plates loosened, so cells can expand further low
Symptoms
- Hybrid or EV system warning, often with reduced power
- Vehicle may not switch to READY because the main contactors stay open
- Charging blocked or limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2E6C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.