P2E65
Engine Coolant Bypass Valve E Stuck/Open
P2E65 is a functional fault: the electrics of valve E are fine, but the valve remains open although it was told to close. The official title is written Stuck/Open, though it means stuck open, the partner of P2E67. No carmaker documents valve E publicly. GM shows the method on its block rotary valve D (P26C0): commanded and measured angle differ by 10° or more while the raw feedback sits at 50° or above, 4 of 5 seconds, Type A in the 2019 L3B tables. Without a position sensor, a Ford patent infers a stuck warm-up valve from coolant and transmission fluid temperatures before and after the command. GM bulletin 21-NA-149 adds that a chafed engine harness can trigger such valve codes. Open valves waste heat during warm-up.
Possible causes
- Valve body jammed open by deposits or worn seals high
- Broken gear or weak actuator that cannot drive the valve closed medium
- Position sensor or its wiring reporting an open valve that is actually closed medium
- Chafed engine harness disturbing drive or feedback signals low
Symptoms
- Engine and cabin heat take longer to come up
- Check engine light
- Slightly higher fuel use on short trips
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2E65
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.