OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E64

Engine Coolant Bypass Valve E Control Circuit High

P2E64 is the high-side counterpart: the control line of coolant bypass valve E carries more voltage than expected, usually because it touches a supply wire, or the load has gone open in a way the output stage reads as high. Valve E itself appears in no public manufacturer document. Ford's 2024 summary shows how this is commonly grouped: for its valves A to D the smart driver's short-to-battery result (fault byte 12) is filed under the High code, for example P26BF for valve D, alongside the general circuit code. Toyota pairs short to battery and open circuit in one subtype, P268115. A supplier patent (AMI Semiconductor) separates the cases by driving test currents into the pin and comparing the resulting voltage with thresholds. Check for chafing against live wires and water in the connector.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 64

Possible causes

  • Drive wire chafed through and touching a battery-voltage wire high
  • Moisture or coolant in the connector creating a path to supply voltage medium
  • Open actuator winding that the output stage reads as high voltage medium
  • Defective output stage in the engine control module low

Symptoms

  • Check engine light
  • Valve is not driven and stays in its de-energised position
  • Possible change in heater output or warm-up time

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2E64

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication