OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E63

Engine Coolant Bypass Valve E Control Circuit Low

P2E63 flags a drive line for coolant bypass valve E whose voltage is lower than the commanded state allows, typically a grounded wire or a heavy leakage path to ground in the harness or the actuator. No carmaker documents valve E publicly. CARB does not even force separate codes for open and shorted outputs, so many systems use only one code. Toyota shows the subtype idea on valve A: P268111 marks a grounded circuit, P268115 a battery short or a broken line; bulletin T-SB-0112-24 fits a new water valve or water bypass hose assembly, depending on model, on A25A and M20A engines (2018–2021). A 1995 US patent on solenoid drivers suspends its checks for a broken line or a battery short for as long as a ground fault persists. Check the harness for chafing at hot or moving parts before replacing the valve.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 63

Possible causes

  • Chafed drive wire touching engine ground high
  • Internal short in the valve actuator, often after coolant got into it medium
  • Corrosion bridging pins in the connector medium
  • Faulty output stage in the engine control module low

Symptoms

  • Check engine light, sometimes a maintenance message
  • Valve does not move or stays in its default position
  • Slower warm-up or changed heater output

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2E63

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication