OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E62

Engine Coolant Bypass Valve E Control Circuit/Open

Coolant bypass valve E is the fifth electrically driven coolant valve in the SAE lettering; which coolant path it controls (heater, radiator, transmission, block) is up to the carmaker. P2E62 says the engine computer sees an open or otherwise faulty drive circuit. No manufacturer documents valve E publicly. Ford's 2020–2023 gasoline summary shows the usual logic for its valves A to D: a smart driver reports an output fault during continuous monitoring and the code sets after 5 s. Driver chips find a broken line by feeding small test currents and checking where the pin voltage settles, as an AMI Semiconductor patent describes. VW fixed P2681 entries on 2024 Atlas models with new engine software instead of parts, so check for updates. Shorts to ground or supply are P2E63 and P2E64.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 62

Possible causes

  • Loose, corroded or unplugged connector at the valve high
  • Broken wire in the drive or supply line medium
  • Open winding in the valve actuator motor or solenoid medium
  • ECM software fault or defective output stage low

Symptoms

  • Check engine light or service message
  • Heating, warm-up or cooling behaves differently, depending on what valve E controls
  • Valve stays in its de-energised default position

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2E62

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication