P2E61
Alternative Fuel Misfire Detected With Low Fuel
P2E61 records misfire that occurs while the engine burns its gaseous fuel and that fuel is almost used up. No manufacturer documents the code publicly. CARB treats a bi-fuel car as alternate-fueled only while it runs on gas and lets makers seek approval to suspend misfire monitoring at 15 % fuel or less, since a nearly empty tank can cause misfire by itself. Ford patents explain it for CNG: the regulator keeps the rail at a few bar, but near 500 psi tank pressure the flow chokes and rail pressure wavers, so metering suffers; one known answer is switching to petrol at low tank pressure. Another Ford patent reads low rail pressure despite gas in the tank, e.g. from ice, as a supply restriction. Refill and recheck; misfire with ample gas is P2E58 to P2E60.
Possible causes
- Gas tank close to empty, so the regulator can no longer hold rail pressure high
- Tank pressure or level signal reads too high, so the system stays on gas too long medium
- Restriction in the gas line (clogged filter, ice) that only shows when tank pressure is low medium
- Worn plugs or coils that cannot ignite the leaner gas mixture near empty low
Symptoms
- Stumbling or power loss on gas when the gas gauge is near empty
- Vehicle changes over to petrol on its own
- Check engine light on
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2E61
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.