OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E60

Cylinder 8 Alternative Fuel Misfire Detected

P2E60 is the last cylinder-specific code of the alternative-fuel misfire group and points to cylinder 8; the next code, P2E61, covers misfire with low fuel. Petrol twin: P0308. No manufacturer documents P2E60 openly. On GM V8s cylinder 8 is the rear cylinder of the even-numbered bank, on Ford V8s the rear of the second bank. In Ford's 1999 bi-fuel LPG/CNG system for the 5.4-litre V8 a metering unit called Compuvalve supplied gas, and an adjustable tuning tee split the flow between the two rails, so a poor split can starve one side. A patent on cleaning Compuvalve injectors names compressor oil as the main deposit. A GM patent shows the protective idea behind such codes: switch a misfiring cylinder to liquid fuel instead of cutting it, which would cost about a quarter to a third of torque.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 60

Possible causes

  • Deposits from compressor oil in the gas injector serving cylinder 8 high
  • Coil or plug on cylinder 8, often hard to reach at the rear of the engine medium
  • Uneven gas split between the two rails starving the bank with cylinder 8 (older bi-fuel systems) low
  • Valve seat wear on cylinder 8 after long gas operation low

Symptoms

  • Misfire on gas, possibly with lean codes on one bank
  • Engine shakes at idle on gas
  • Check engine light

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E60

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication