OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E5F

Cylinder 7 Alternative Fuel Misfire Detected

P2E5F puts alternative-fuel misfire on cylinder 7, so it concerns eight-cylinder engines, for instance GM's Vortec 6.0 V8 in the bi-fuel Silverado/Sierra or the dedicated CNG and LPG Express/Savana vans that GM lists in its gaseous-fuel overview bulletin. P0307 is the petrol counterpart. No maker documents P2E5F publicly. On GM V8s cylinder 7 is the rear cylinder of the odd-numbered bank; on Ford V8s it is the third cylinder of the second bank. Conversion hardware adds failure points per cylinder: Ford's 2003 bi-fuel CNG system fed gas through sleeves set into each petrol injector seat, with a separate module driving the gas injectors, and Landi Renzo's 6.0-litre manual tells technicians to verify each nozzle in its port and the routing of the injector harness. Check these before the coil.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 5F

Possible causes

  • Gas injector on cylinder 7 faulty or sticking high
  • Leaking injector sleeve or loose nozzle at cylinder 7's intake runner medium
  • Conversion injector harness damaged or misrouted near the rear of the engine medium
  • Coil or plug on cylinder 7 too weak for gas medium

Symptoms

  • Rough running on gas, smooth on petrol
  • Gas-mode indicator flashing or automatic return to petrol
  • Check engine light

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E5F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication