OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E5E

Cylinder 6 Alternative Fuel Misfire Detected

P2E5E names cylinder 6 as the misfiring one while the engine runs on alternative fuel; P0306 is its petrol twin. No manufacturer documents the code openly. On inline sixes cylinder 6 is the rearmost. With liquid propane injection, fuel turning to vapour in the rail is a known gas-specific cause: Roush CleanTech's diagnostic manual names running in the vapour region as a reason for P03xx misfire, a Ford patent notes that propane left in a hot rail boils off after shutdown and expands about 250-fold, and an Agility patent describes vapour forming when pressure sags along a rail feeding its injectors in series, so too little fuel is metered. Note whether misfire follows hot restarts or a low tank. A Texas training manual on propane conversions recommends the scan tool's cylinder balance test to confirm the cylinder.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 5E

Possible causes

  • Gas or liquid-propane injector on cylinder 6 sticking or leaking high
  • Propane vapour in the liquid-injection rail (hot restart, low rail or tank pressure) medium
  • Plug or coil on cylinder 6 failing under gas medium
  • Low tank pressure in cold weather or nearly empty tank low

Symptoms

  • Misfire or rough running shortly after a hot restart
  • Long cranking time when the engine is warm
  • Check engine light

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E5E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication