P2E5C
Cylinder 4 Alternative Fuel Misfire Detected
P2E5C is stored when the misfire counter blames cylinder 4 while gas is being burned; in petrol mode the code would be P0304. No manufacturer documents P2E5C publicly, and Deutz's fault list for its eControls LPG, CNG and bi-fuel engines reports such events with the ordinary P0301 to P0304. On four-cylinder engines cylinder 4 is the last one in the block. Ignition is the main gas-related suspect: NGK points out that a gas/air charge needs a clearly higher firing voltage than petrol, which loads the coils and wears the plugs faster, and the US Department of Energy notes that natural gas reacts more sensitively to spark quality. A coil or plug that still works on petrol can therefore drop out on gas alone. Check plug type and gap for gas, coil and boot, then move the coil to another cylinder.
Possible causes
- Spark plug on cylinder 4 worn or unsuited for gas (gap too wide, wrong heat range) high
- Coil or plug boot on cylinder 4 breaking down under the higher firing voltage high
- Gas injector on cylinder 4 sticking or delivering too little medium
Symptoms
- Misfire mainly under load or acceleration on gas
- Engine runs cleanly after switching to petrol
- Check engine light, flashing during heavy misfire
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2E5C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.