OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E5B

Cylinder 3 Alternative Fuel Misfire Detected

P2E5B flags misfire on cylinder 3 during operation on CNG or LPG; on petrol the matching code is P0303. No manufacturer publishes P2E5B. One cause that belongs to gas engines in particular is valve seat wear: dry gaseous fuels leave few combustion products, so valve and seat insert rub metal on metal and the seat recedes, as a Honda patent on seat materials explains. Once a valve stops sealing, compression in that cylinder falls and combustion becomes unreliable. For this reason natural-gas engines usually carry hardened exhaust valves and seats, and Ford's 2014 F-150 gaseous-fuel prep package added hardened valves, seats, pistons and rings. A compression or leak-down test on cylinder 3 separates this from injector or ignition faults; engines converted without hardened parts deserve extra suspicion.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 5B

Possible causes

  • Valve seat recession on cylinder 3 from dry gas operation, valve no longer seals medium
  • Faulty gas injector on cylinder 3 high
  • Worn plug or failing coil on cylinder 3 medium
  • Retrofit gas conversion on an engine without hardened valves and seats low

Symptoms

  • Misfire on gas that slowly gets worse, later also on petrol
  • Low compression on cylinder 3, sometimes a ticking valve noise
  • Check engine light

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2E5B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication