OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E5A

Cylinder 2 Alternative Fuel Misfire Detected

P2E5A says cylinder 2 is the one losing combustion while the engine is supplied with alternative fuel; P0302 is its petrol twin. No manufacturer documents this code publicly. On inline engines cylinder 2 follows cylinder 1; on V engines it is either the foremost cylinder on the other bank (GM, Chrysler) or the second one of the first bank (Ford, Audi). The gas injector is the typical gas-specific suspect: compressor oil carried in CNG condenses after the pressure regulator, reaches the injectors unevenly and can gum single valves or make them close erratically, as GM and Siemens patents describe. Landi Renzo's service manual for its 6.0-litre CNG conversion asks for misfire codes to check the injector plug, the nozzle seated in its port, the drive signal and injector wiring not crossed between cylinders.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 5A

Possible causes

  • Gas injector on cylinder 2 gummed or sluggish from compressor oil in the gas high
  • Injector harness of the conversion routed crosswise, so cylinder 2 receives another cylinder's pulse medium
  • Injection nozzle of cylinder 2 not properly seated in the manifold port medium
  • Coil or plug on cylinder 2 too weak for gas operation medium

Symptoms

  • Uneven running on gas, normal on petrol
  • Higher gas consumption and loss of power
  • Check engine light

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E5A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication