OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2E59

Cylinder 1 Alternative Fuel Misfire Detected

P2E59 means that, while the engine is burning its gaseous fuel, the misfire monitor puts the dropouts on cylinder 1; CARB allows a single-cylinder code once more than 90 % of counted misfires fall on one cylinder. In most numbering schemes cylinder 1 is the frontmost. No manufacturer publishes P2E59. Honda logged misfire on its 2008 Civic CNG as P0301 to P0304 and had dealers swap coils to see whether the fault moved with the coil. On GM's 2013 Silverado/Sierra bi-fuel the injector module hands over from petrol to CNG injectors one cylinder after another, starting at cylinder 1, so a misfire seen only at changeover should be told apart from one in steady gas mode. Check the CNG injector, its hose and nozzle on cylinder 1, then coil and plug. Misfire on petrol too: P0301.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberE / 59

Possible causes

  • Sticking or leaking gas injector on cylinder 1 high
  • Cracked injector hose or loose nozzle in the intake port of cylinder 1 medium
  • Weak coil or worn plug on cylinder 1 that fails only under gas medium
  • Fault in the fuel changeover module or its programming (misfire only at the switch from petrol to gas) low

Symptoms

  • Rough idle on gas that disappears in petrol mode
  • Stumble at the moment the system changes over to gas
  • Check engine light, possibly flashing under load

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2E59

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication